In recent years, the spotlight on water quality has grown intensely, influencing consumer demand and regulatory standards profoundly. But what impact does this heightened focus have on the demand for bottle-filling stations? Stephanie Guttas, product manager at OASIS International, gave her insight into current trends and what is driving demand today and in the future.
“The wave of urbanization, aging infrastructure, and evolving technology can all contribute to the presence of contaminants in water supplies. Bottle fillers with UV and other filtration systems provide convenient, accessible solutions for improving drinking water.” Guttas adds that growth in new construction and stricter government regulations often can lead to increased water testing, and awareness is raised when contaminants are detected.
Consumers are on notice and are seeking solutions that deliver safer water.
Stephanie Guttas, OASISInternational
When examining which sectors are witnessing the most growth in the use of bottle filling stations, two areas stand out: the K-12 education sector and the aviation industry.
“In the K-12 education segment, there’s noticeable growth driven by government funding and private-public partnerships, supplementing state and municipal budgets,” Guttas explains the shift in the education sector.
Meanwhile, the aviation industry is also experiencing a substantial demand. “Predicted strong demand for air travel indicates more airport construction, expanding and modernizing facilities. Federal programs and private funding are expected to boost this sector,” she says shows the evolving needs in air travel infrastructure.
Recent global events have undeniably accelerated changes in consumer behaviors, impacting industries across the board, including water filtration and hydration solutions.
“Global events have shifted consumer behaviors, necessitating our focus on listening to customers and continuously improving our offerings,” emphasizes the need for companies like Oasis to stay attuned to these changes.
As consumers increasingly seek solutions that deliver safe, clean drinking water, the focus is not only on meeting current demands but also on anticipating future needs. By staying ahead of trends, leveraging new technologies, and understanding the evolving requirements of different sectors, companies can not only contribute to public health and safety but also lead the way in sustainable, innovative water solutions.
OASIS has the clean answer to provide water for public areas while limiting the spread of germs with innovative products. With a full suite of products, OASIS has the solutions to help keep your clients, visitors, employees, and tenants hydrated and healthy. Contact us today to learn your hydration solutions.
It’s that exciting time of year again – Back-to-School season for Fall 2023! OASIS is here to help give the school year a refreshing start with recommended instructions for bringing a cooler back into service after being shut down.
Supplies Required for the OASIS PG8AC unit
Disinfectant wipes or food grade disinfectant
Latex or nitrile gloves
T 15 Torx Screwdriver
Bucket
¼” Union part #028605-101
Step 1 – Unplug Unit
Remove front cover (if necessary) to access electric plug
Unplug from outlet
Step 2 – Prep the Cooler
Shut off water valve – note this is for example only, actual valves can differ
Press dispense pad until water stops to depressurize
Step 3 – Bypass the Filter (if applicable)
This is a great time to change the filter cartridge
Remove the tubing from the filter head
Step 4 – Draining the Cold Tank
Depress the collet and remove the drain plug
Allow tank to drain to completely into bucket.
Note – Some models may have a cap instead of a plug.
Step 5 – Closing the Tank Drain
Insert the plug into the union fitting to close the tank drain
Insert the cap onto the drain line to close the tank drain
Step 6 – 1st Flush Cycle
Turn ON water supply
Depress pad until water fills the cold tank and runs consistently, allow approximately 2 gallons
Step 7 – Repeat Draining the Cold Tank
Shut off water supply
Depressurize
Remove drain plug on tank
Drain into bucket
Step 8 – 2nd Flush Cycle
Turn ON water supply
Run 2 more gallons through the unit
Step 9 – Reconnect the Filter (if applicable)
Shut off water and depressurize the unit once more
Note – It is recommended to properly flush the replacement filter cartridge before connecting to the cooler
Remove lines from union
Reinsert the tubing into the filter head
Step 10 – Flushing Complete
Turn ON water supply
Run water by depressing the dispense pad
Plug unit back into outlet
Step 11 – Sanitizing the Exterior
Clean the top of the unit, push pads and bubbler with disinfectant wipes
ESSER II expiring September 30, 2023 ESSER III expiring September 30, 2024
ESSER Funding Overview ESSER funding is a federal grant program that provides funding to states and local educational agencies (LEAs) to help them address the impact of COVID-19 in education. The ESSER funds can be used to improve K-12 public schools infrastructure to reduce risk of virus transmission and exposure to environmental health hazards, and to support student health needs.
Investing ESSER II & III funding in hygienic hydration solutions, such as contactless bottle-filling stations and drinking fountains with filtration systems targeting lead and other harmful contaminants is essential to ensure students’ access to safe and clean drinking water.
You have the grant money, OASIS has the products. Act now and install units over holiday breaks. Providing clean drinking water is essential for a healthy future for ourselves and our students.
How can I use my awarded ESSER funding?
Replace old units to contactless bottle filling stations and drinking fountains, reducing the risk of virus transmission
Upgrade your filtration systems for safe, clean drinking water
Focus on your sustainability goals, reducing the use of single use plastic and waste with bottle filling stations
There is money still left in ESSER funds with limited time to spend it. Act now and install over holiday breaks!
